News
-
The correct use of the tractor throttle
Tractors have been widely used in agriculture, so what problems should we pay attention to for the correct use of tractor throttles? 1, before starting, do not repeatedly press the accelerator Some drivers repeatedly press the accelerator in order to get the vaporizer and accelerator to start w... -
1504-HX tractor product features
This series of tractors is a multi-purpose, high-horsepower agricultural wheel tractor, which has the characteristics of compact structure, convenient operation, flexible steering, large traction, wide use, easy maintenance and so on. The use of TF large rear axle, four-wheel drive, 16F-8R gear t... -
Technical maintenance regulations for tractors used for 1600 hours
(1) Complete all the contents of 800h technical maintenance. (2) Clean and maintain the diesel engine cooling system. (3) Replace the front drive axle central transmission and final transmission lubricants. (4) Check, adjust, maintain and maintain the starting motor. (5) Maintain the diesel e... -
Technical maintenance regulations for tractors used for 800 hours
(1) Complete all the contents of 400h technical maintenance. (2) Replace the transmission hydraulic oil for the hydraulic steering system. (3) Replace the transmission hydraulic oil for the transmission system and the lifter. (4) Check the valve clearance of the diesel engine. (5) Check and a... -
Technical maintenance regulations for tractors used for 400 hours
(1) Complete all contents of 200h technical maintenance. (2) Add grease according to the maintenance table 5-1. (3) Check the oil level of the central transmission and final transmission of the front drive axle and add if necessary. (4) Check the oil level of the transmission system and lifter... -
Technical maintenance regulations for tractors used for 200 hours
(1) Complete all the contents of 50h technical maintenance; (2) Replace the lubricant in the diesel engine oil pan. (3) Clean and maintain the oil basin of the oil-bath air filter. (4) Clean the hydraulic oil filter of the lifter and replace the filter element if necessary. (5) Maintain the d... -
Technical maintenance regulations for tractors used for 50 hours
(1) Complete all the contents of each technical maintenance (2) Add grease according to the maintenance table 5-1. (3) Check the oil surface of the oil-bath air filter and remove dust. (4) Maintain the diesel engine in accordance with the requirements of "Class 1 Technical Maintenance" in the ... -
Technical maintenance regulations during the use of tractors
This series of tractors determine the technical maintenance cycle according to the accumulated working hours, which is divided into technical maintenance per shift (10h per work), 50h technical maintenance, 200h technical maintenance, 400h technical maintenance, 800h technical maintenance, and 16... -
Safety matters when the tractor starts
1. After the tractor engine is started, it must be idling to warm up and reach the specified water temperature and oil temperature. After it runs normally, it can start and gradually increase the load; 2. Before starting or transmitting power, you must observe the surrounding conditions, send ... -
Maintenance of tractor battery
The tractor uses a high-quality maintenance-free battery, which has the advantages of no need to add water, strong and durable, safe to use, and large starting current. For detailed state inspection, maintenance and charging methods, please refer to the battery user manual. note: (1) When c... -
About tractor maintenance instructions
1. Cleaning the tractor. Frequent cleaning can keep the tractor clean and prevent dust and debris from entering the machine when fuel or lubricating oil is added. And it can discover hidden dangers in time to prevent blockage, damage and parts corrosion. Therefore, after each shift, the dust and ... -
Orders continue, tractors usher in peak season production
Recently, market orders for the tractor business have continued, ushering in a new round of peak season production. Walking into the tractor production workshop, I saw that in the production workshop, the machines were spinning, the workers were busy, and each production line started a ten...