Tractors have been widely used in agriculture, so what problems should we pay attention to for the correct use of tractor throttles?
1, before starting, do not repeatedly press the accelerator
Some drivers repeatedly press the accelerator in order to get the vaporizer and accelerator to start working, so that more gasoline is injected into the cylinder to meet the starting needs. This will not only do nothing to start the tractor, but will also increase the wear of the injection pump control device and the oil volume adjustment mechanism.

2, when starting the engine, the throttle opening degree to take the small degree is good
At the beginning, refueling should be slightly in front of the clutch linkage point, the accelerator pedal do not press to the end, slightly higher than the idle throttle as well. The relaxation clutch should work closely with the accelerator and be agile.

3, when separating the clutch should reduce the throttle
Some hands do not reduce the throttle in time to separate the clutch, causing the engine to idle, resulting in a sudden increase in speed, which will not only waste fuel, but also increase the wear of the drive system.

4, in operation, should be based on road conditions and actual needs to increase or decrease the throttle
The selected gears should be appropriate so that the engine runs most of the time at medium speed and with larger throttles to save fuel. The coordination between emptying the oil, pressing the clutch and pressing the accelerator pedal should be coordinated when changing gears. Yantai and De Yantai tractor factory we look forward to your visit!